11
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack, or charger in
fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Do not attempt to modify this tool or create accessories not recom-
mended for use with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assem-
bling parts.
This cordless reciprocating saw must be used only with the battery packs and charger
listed below:
Battery Pack
Charger
2Ah
2.5Ah
4Ah
5Ah
SKIL BY519701
SKIL BY519702 SKIL BY519703
SKIL BY519601 SKIL BY519603 SKIL SC535801
SKIL QC536001
NOTICE: Please refer to the battery and charger manual for detailed operating information.
Lock-off Button (Fig. 2)
Your tool is equipped with a lock-off button, located above the variable-speed trigger switch, to
prevent the saw from being activated unintentionally.
To lock the switch in the off position, depress the lock-off button to the (locked) position.
To unlock the switch, depress the lock-off button to the (unlocked) position.
Fig. 2