Skil PWRCore 20, Руководство пользователя

Страница: 11 / 16

11
• Splinter-free cutting
- cover cutting-line with several layers of wide tape
before cutting
- always face the good side of the workpiece down
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool clean (especially ventilation slots
1
)
! remove battery from tool before cleaning
• If lever loosens during use, set the tightness of lever
o
-
place lever in middle position
- loosen lock screw with PH2 screw driver counter
clockwise
- tighten set screw finger tight with Allen key 4mm
counter clockwise
! set screw uses left hand thread
- tighten lock screw with PH2 screw driver clockwise
- tighten lever
• Be aware that damage due to overload or improper
handling of the tool will be excluded from the warranty
ENVIRONMENT
• Do not dispose of electric tools,
batteries,accessories and packaging together
with household waste material. The electric tools,
accessories and packaging should be sorted for
environmental friendly recycling
• ! prior to disposal protect battery terminals with
heavy tape to prevent short-circuitl
#
-
put button in the right position to prevent accidently
switching on the tool
• Changing saw blades
7
! remove battery from tool before making any
adjustments or changing accessories
! insert blade to full depth with teeth facing forward
8
- tool accepts most commonly available T-shank and
U-shank blades
7
• Sawing at 45°
9
• Selecting sawing mode
q
• Use lever
1
for adjusting the orbital action from
accurate cutting (= 0) to fast cutting (= 3)
-
1 setting (“0”) for accurate cutting in all materials,
st curved
-
3 settings for fast cutting in different materials, straight
cuts only
1 = aluminum, plastic
2 = hard wood
3 = soft wood
! always select “0” when sawing splinter-sensitive
material
• LED-light
w
LED-light automatically lights on when activating switch
• Switch for dust blowing
e
• Dust suction
r
- connect vacuum cleaner adapter to foot
- connect vacuum cleaner hose to vacuum cleaner
adapter
• Operating the tool
- before switching on the tool, ensure that front end of
footplate rests flat on the workpiece
- hold tool firmly with both hands, so you will have full
control of the tool at all times
! while working, always hold the tool at the grey-
coloured grip area(s)
t
-
ensure that complete surface of footplate rests firmly on
the workpiece
! ensure that the blade has come to a complete
standstill, before you lift the tool from the
workpiece
-
keep ventilation slots
1
uncovered
• Battery protection
Switches off the tool or prevents the tool from being
switched on, when
- the load is too high
- the battery temperature is not within the allowable
operating temperature range of -20 to +50°C
- the lithium-ion battery is nearly empty (to protect
against deep discharge)
! do not continue to press the on/off switch after the
tool is switched off automatically; battery may be
damaged
APPLICATION ADVICE
• Use the appropriate saw blades
y
! tool accepts most commonly available T-shank
and U-shank blades
7
• When cutting metals, lubricate saw blade regularly with
oil
• For an accurate straight cut, guide tool with footplate
along the edge of a straight piece of wood
u
• Pre-drill a hole before making cut-outs
i