5
USE
• Charging battery
! read the safety warnings and instructions
provided with the charger
• Removing/installing the battery
1
• Battery protection
The tool is suddenly being switched off or prevented from
being switched on, when
-
the load is too high --> remove load and restart
-
the battery temperature is not within the allowable
operating temperature range of -20 to +50°C --> 2
levels of the battery level indicator start flashing when
pressing button
6
c; wait until battery has returned
within the allowable operating temperature range.
-
the battery is nearly empty (to protect against
deep discharge) --> a low battery level or flashing low
battery level
6
b is shown by the battery level indicator
when pressing button; charge battery
! do not continue to press the on/off switch after the
tool is switched off automatically;
battery may be damaged
• Car socket connection
7
-
as alternative to a battery pack, the car socket can be
used as power supply.
-
remove the car socket adapter from the storage
compartment.
-
connect adapter to the car socke
• On/off
1
-
press button
-
LCD display will show pressure information
-
by pressing the function button you can switch between
high pressure (default) and high volume function
-
press LED button to turn the work light on/off
-
press button again to turn off
! after approx. 5 minutes of inactivity the tool will
automatically turn off
HIGH PRESSURE FUNCTION
• Connecting the air hose
8
-
unlock the air chuck clamp
-
place the air chuck on valve stem
! for Presta and Dunlop valves screw the adapter on
the valve stem before placing the air chuck.
-
push the air chuck down so that the threaded section of
the valve stem is inside the air chuck
-
lock the air chuck clamp
• Removing/installing adapters
9
-
unlock the air chuck clamp
-
push the adapter into the air chuck until it stops
-
lock the air chuck clamp
• Set target pressure
q
! make sure that the high pressure function is
selected
q
a
-
target pressure can be increased and decreased with
+ and – buttons to the desired value (between 0.2 and
11.0 bar)
-
to change the pressure unit press + and – buttons
together
! to avoid over inflation, read the instruction
provided with the items to be inflated and never
exceed recommended pressures
INTRODUCTION
• This tool is intended for inflating tires, balls and other
small volume items which fit the air chuck directly, or by
using the supplied adapters
• This tool is intended for inflating large volume items such
as air beds, pools, boats, etc.
• This tool is not intended for professional use
• Read this instruction manual carefully before use and
save it for future reference
3
SAFETY
• Never allow children, persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar with
these instructions to use the tool.
• Supervise children(this will ensure that children do not
play with the tool)
• Cleaning and user maintenance of the tool shall not
be made by children without supervision
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Store the tool indoors in a dry and locked-up place, out
of reach of children
• Do not use tool when damaged; take it to one of the
officially registered SKIL Service Stations for a safety
check
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Provide for good ventilation at the working place
• Make sure that the hose is free of obstructions
or snags. Entangled or snarled hoses may become
damaged
• Never leave an inflator unattended with the air hose
attached
• Do not continue to use an inflator or hose that leaks air or
does not function properly
• Do not attempt to pull or carry the inflator by the hoses
Only use the following batteries and chargers with this
tool
-
SKIL battery: BY5197E-03 BY5196E-03
-
SKIL charger: SC5358E-01 QC5360E-01 QC5359E-00
• Do not use battery when damaged; it should be replaced
immediately
• Do not disassemble the battery
• Do not expose tool/battery to rain
• Permitted ambient temperature (tool/charger/battery):
-
when charging 4...40°C
-
during operation –20...+50°C
-
during storage –20...+50°C
EXPLANATION OF SYMBOLS ON TOOL/BATTERY
3
Read the instruction manual before use
4
Insulation class III
5
Do not dispose of electric tools and batteries together
with household waste material
Содержание PWRCORE 20 IF5940E-00
Страница 8: ......
