32
2. Move the table extension inward or outward depend on your application.
A screw serves
as the limit stop which is built in the extension rod, to prevent the extension rod falling off.
(Fig.33a & 33b)
3.
Tighten the lock knob to secure the extension in place.
4.
Repeat for other extension.
Fig. 33a
Fig. 33b
Base
Table extension screw
Adjusting support foot
Turn the support foot clockwise or
counterclockwise depending on the amount
of support needed for making sliding cuts.
(Fig.34)
Fig. 34
Support foot
