12
Removing and installing dust
canister
To remove dust canister, simply pull away from
the tool (Fig. 3).
To install dust canister, align dust port tab with
slot in canister and push canister onto tool.
Cleaning and emptying the dust canister
Remove canister from tool and knock excess dust out of the microfilter, or remove dust with
your fingers or a soft brush. You may notice that all the dust may not come out of the canister.
This will not affect sanding performance but will reduce dust collection efficiency.
NOTE:
Do not wash the micro filter with soap and water. Dust may become more firmly lodged
in the pores, which will reduce dust collection, and damage the micro filter.
Dust extraction
Your tool is equipped with a dust port for dust
extraction. To use this feature, insert standard
1-1/4” vacuum hose into the dust port, and
connect the opposite end of the hose to a shop
vacuum cleaner (Fig. 4).
Fig. 3
Microfilter Dust
Canister
Tab
Dust Port
Fig. 4
Standard 1-1/4”
Vacuum Hose
Dust Port
