Skil 0761, Оригинальное руководство пользователя

Страница: 10 / 104

10
High-pressure washer 0761
INTRODUCTION
• This tool has been designed for cleaning areas and
objects outside the house, vehicles and boats
• This tool is intended for domestic use only and is not
designed to operate with water from sources other than a
watertap
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing
2
• When parts are missing or damaged, please contact your
dealer
• Read this instruction manual carefully before use
and save it for future reference
3
• Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious injury
TECHNICAL DATA
1
Working pressure (P) 7 MPa
Maximum working pressure (Pmax) 10,5 MPa
Inlet pressure 0 - 0,4 MPa
TOOL ELEMENTS
2
A Trigger lock
B Trigger
C Inlet connector
D Water inlet
E Water filter
F Mains switch
G Spraying nozzle
H Detergent bottle
J Detergent nozzle
K Upper spray lance
L Lower spray lance
M Hand gun
N Storage component
P Cleaning needle
Q High-pressure hose
R Water outlet
S Ventilation slots
T Connection for storage component
SAFETY
GENERAL
• This tool can be used by
children aged 8 and above and
by persons who have physical,
sensory or mental limitations
or a lack of experience or
knowledge if a person
responsible for their safety
supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
• Supervise children (this will
ensure that children do not play
with the tool)
• Cleaning and user
maintenance of the tool shall
not be made by children
without supervision
• Use the tool and its accessories in accordance with this
instruction manual and in the manner intended for the
tool; use of the tool for operations, different from those
normally expected to be performed by the tool, could
result in a hazardous situation
• Never draw in solvent-containing liquids, undiluted
acids or solvents (e.g. petrol, paint thinners, heating
oil) ; these liquids produce a highly flammable, explosive
and toxic sprayed vapour and they also corrode the tool
components
• Only use the tool when the ambient temperature is
between 0°C and 40°C
• Start working only when tool and operating
equipment are in perfect condition and safe to
operate
• Be aware of the kickback forces that occur when starting
the high-pressure washer; hold hand gun and spray lance
firmly and take a secure stance
• Never clamp the trigger in position during operation
• Never direct the water jet towards other people,
animals, live electrical equipment or the tool itself
4
• Never leave the tool unattended while the motor is
running
• Do not operate the tool in potentially explosive locations
• Always switch off tool, disconnect plug from power
source, and ensure there is no water pressure in
tool and hand gun before adjusting, cleaning or
changing accessories
PERSONAL SAFETY
• Wear suitable protective clothing to protect against
splashing water
• Do not use the tool with other persons in the vicinity
unless they wear protective clothing
• Do not spray materials containing asbestos and other
materials which contain substances which are hazardous
to your health
• Only clean tyres/tyre valves from a minimum distance of
30 cm to prevent damaging them (damaged vehicle tyres
may lead to fatal accidents)
• Do not direct the water jet against yourself or others
in order to clean clothes or footwear
WATER SUPPLY
• Only use the high-pressure hose and coupling
supplied with the tool