Skibo PEQUEA CX550, Руководство оператора

Страница: 9 / 16

7
OPERATION
Chip chute adjustments
To position the chip chute, pull the spring loaded pin (Figure 2) upward and rotate it to lock it
the retracted position (Figure 3). The chute conveniently rotates a full 360 degrees. Rotate it
to the desired position. Pull the pin upward again and rotate it until it can fully extend and the
chute can know longer rotate freely. Be sure the pin is locked in place, fully extended, before
transporting or the chipper!
Figure 2
Pull up to
rotate chute
Figure 3
Figure 3
Deflector
The chip deflector easily adjusts to regulate the distance that the chips are thrown. Loosen the
two clamp knobs and adjust as desired. (Figure 3 & 4)
Figure 4
Pull up and rotate
to lock or release