Ski-Doo Tundra Series Скачать руководство пользователя | Manualshive

Страница: 140 / 159

background image

BRP INTERNATIONAL LIMITED WARRANTY: 2013
SKI-DOO

®

SNOWMOBILES

1) SCOPE OF THE LIMITED WARRANTY

Bombardier Recreational Products Inc. (“BRP”)* warrants its 2013 Ski-Doo snow-
mobiles sold by distributors or dealers authorized by BRP to distribute SKI-Doo
snowmobiles ("Ski-Doo Distributor/Dealer") outside of the fifty United States,
Canada and states that are members of the European Economic Area ("EEA")
(which is comprised of the states members of the European Union plus Norway,
Iceland and Liechtenstein), Turkey, and states members of the Commonwealth
of the Independent States (''CIS'') (which is comprised of the Russian Federation
and ex-members states of the USSR), from defects in material or workmanship
for the period and under the conditions described below.

All genuine Ski-Doo parts and accessories, installed by an authorized Ski-Doo
Distributor/Dealer at the time of delivery of the 2013 Ski-Doo snowmobile, carry
the same warranty as that of the snowmobile.

This limited warranty will become null and void if: (1) the snowmobile was used for
racing or any other competitive activity, at any point, even by a previous owner; or
(2) the snowmobile has been altered or modified in such a way so as to adversely
affect its operation, performance or durability, or has been altered or modified to
change its intended use.

2) LIMITATIONS OF LIABILITY

TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS EXPRESSLY
GIVEN AND ACCEPTED IN LIEU OF ANY AND ALL OTHER WARRANTIES, EX-
PRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED WARRANTIES
ARE LIMITED IN DURATION TO THE LIFE OF THE EXPRESS WARRANTY.
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE EXCLUDED FROM
COVERAGE UNDER THIS WARRANTY. SOME JURISDICTIONS DO NOT AL-
LOW FOR THE DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED
ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY. (FOR PROD-
UCTS PURCHASED IN AUSTRALIA SEE CLAUSE 4 BELOW).

Neither the Ski-Doo Distributor/Dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforceable
against BRP.

BRP reserves the right to modify this warranty at any time, being understood that
such modification will not alter the warranty conditions applicable to the products
sold while this warranty is in effect.

3) EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under this limited warranty under any circum-
stances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;

138

______________

«
...
138
139
140
141
142
...
»

Содержание Tundra Series
































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Tundra Series

TRAIL BOSS 2003

Бренд: Polaris Страницы: 213

Бренд: FEISHEN Страницы: 41

Бренд: Toro Страницы: 28

Бренд: GMX MOTORBIKES Страницы: 57

Бренд: PRONAR Страницы: 131

Red Pedal Go Kart

Бренд: Oypla Kids Страницы: 5

Бренд: Mahindra Страницы: 79

Бренд: Yamaha Страницы: 32

Бренд: KAYO MOTOR Страницы: 80

K550ATV EEC 4x4

Бренд: FEISHEN Страницы: 102

Бренд: Cannondale Страницы: 180

Бренд: Suzuki Страницы: 50

Workman 133-0959

Бренд: Toro Страницы: 8

Workman MDE 07299

Бренд: Toro Страницы: 44

Бренд: Toro Страницы: 56

Workman HDX 07383

Бренд: Toro Страницы: 68

TrailPro Deluxe

Бренд: TransTank Страницы: 20

10' Single Multi Trailer

Бренд: Marlon Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды