Ski-Doo Skandic Series, Руководство оператора

Страница: 47 / 123

14) High Beam Pilot
Lamp (Blue)
Lights when headlamp is on HIGH
beam.
15) Rewind Starter Handle
Auto-rewind type located on right
hand side of snowmobile. To engage
mechanism, pull handle slowly until a
resistance is felt, then pull vigorously.
Slowly release handle.
16) Choke Lever
This device features a 3-position lever
to facilitate cold start.
1
2
3
A06H1KA
1. OFF
2. Position 2
3. Position 3
Initial Cold Starting
NOTE:
Do not operate the throttle
lever with the choke lever on.
Move the choke lever to position 3 and
start the engine. As soon as the en-
gine starts move the lever to position
2. After a few seconds (10 seconds
maximum) move the choke lever to
OFF.
NOTE:
In severe cold weather, colder
than - 20°C (- 4°F) you may need to
flip choke lever from position 1 (OFF)
to position 2 a couple of times once
engine is started.
Warm Engine Starting
Start the engine without any choke. If
the engine will not start after two pulls
of the rope or two 5 second attempts
with the electric starter move choke
lever to position 2. Start the engine
without activating the throttle lever.
As soon as the engine starts move the
choke lever to position 1 (OFF).
17) Speedometer
Direct-reading dial indicates the speed
of the snowmobile in kilometers per
hour (miles per hour for the USA).
Expedition TUV Series
These models are equipped with an
electronic speedometer. It may show
speed in km/h or MPH.
NOTE:
At vehicle speed of 90 km/h
(55 MPH) and more the mode LCD
screen will show speed only instead
of the selected mode.
Change from One Unit to
the Other
NOTE: Speedometer, odometer and
trip meter will have their units (kilome-
ter or miles) changed all together.
Stop engine and open engine com-
partment. Cut locking ties. Plug con-
nectors together to change units from
miles to kilometers.
Unplug to return to miles reading.
Fasten connector to harness with
locking ties.
A29E126
CONNECTORS LOCATION
_____________________
45