Ski-Doo Scandic Tundra Series, Руководство оператора, Страница: 36 / 115

CONTROLS, INSTRUMENTS AND EQUIPMENT
WARNING
If the switch has been used in an
emergency caused by a suspected
malfunction, the source of the mal-
function should be determined
and corrected before restarting
engine. See an authorized Ski-Doo
dealer for servicing.
7) Ignition Switch
Ignition switch is located on the RH
side of gauge support.
mmo2010-004-002_a
TYPICAL
1. OFF
2. ON
3. START
Turn key to ON position to allow man-
ual engine starting.
On electric start models, turn key to
START position to engage starter.
Refer to ENGINE STARTING PROCE-
DURE
in the
OPERATING INSTRUC-
TIONS section for detailed starting
procedure.
8) Choke Lever
The choke lever has 3-positions.
1
2
3
A06H1KA
1. OFF
2. Position 2
3. Position 3
Refer to
CHOKE APPLICATION
in the
OPERATING INSTRUCTIONS section
for instructions on choke use.
9) Multifunction Switch
(Tundra Sport and
Tundra LT)
Multifunction switch is located on the
LH side of handlebar.
mmo2007-003-003_a
1. Headlights Dimmer Switch
2. Heated Grips Switch
3. Heated Throttle Lever Switch
4. Electronic Reverse Button
Electronic Reverse Button
Press to engage the electronic re-
verse. Refer to
REVERSE (RER™) in
OPERATING INSTRUCTIONS
section
for procedure.
Headlights Dimmer Switch
Press to select HI or LOW beam.
Lights are automatically ON when the
engine is running.
34
______________