Ski-Doo MX Zx 600 RS, Руководство оператора

Страница: 87 / 123

MAINTENANCE PROCEDURES
Clean sheaves of both pulleys using
PULLEY FLANGE CLEANER (P/N 413
711 809).
Inspect the hood and repair any dam-
age.
Touch up all metal spots where paint
has been scratched off. Spray all metal
parts including shock chromed rods
with XPS LUBE (P/N 293 600 016).
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only. Protect the vehicle with a cover
to prevent dust accumulation during
storage.
NOTICE
The snowmobile has to
be stored in a cool and dry place and
covered with an opaque tarpaulin.
This will prevent sun rays and grime
from affecting plastic components
and vehicle finish.
Lift rear of vehicle until track is clear
of the ground. Install on a wide-base
snowmobile mechanical stand with a
rear deflector panel.
WARNING
Do not attempt to lift the vehicle
by hand alone. Use appropriate
lifting device or have assistance
to share lifting stress in order to
avoid risk of strain injuries.
NOTE: Do not release track tension.
_______________
85