91
Drive Belt Condition
Inspect belt for cracks, fraying or abnormal wear (uneven wear, wear
on one side, missing cogs, cracked fabric). If abnormal wear is noted,
probable cause could be pulley misalignment, excessive RPM with
frozen track, fast starts without warm-up period, burred or rusty
sheave, oil on belt or distorted belt. Contact an authorized SKI-DOO
dealer.
Check the drive belt width. Replace the drive belt if width is less than
the minimum width recommended in SPECIFICATIONS.
Brake Condition
Brake Adjustment
A hydraulic brake is not adjustable. See an authorized SKI-DOO dealer
if any problems.
Rear Suspension Condition
Visually inspect all suspension components including slider shoes,
springs, wheels, etc.
NOTE:
During normal driving, snow will act as a lubricant and coolant
for the slider shoes. Extensive riding on ice or sanded snow, will
create excessive heat build-up and cause premature slider shoe wear.
Suspension Stopper Strap Condition
Inspect stopper strap for wear and cracks, bolt and nut for tightness.
If loose inspect holes for deformation. Replace as required. Torque nut
to 9 N•m (80 lbf•
in
).
Track Condition
Lift the rear of the snowmobile and support it off the ground. With
the engine
off
, rotate the track by hand, and inspect condition. If worn
or cut, or if track fibers are exposed, or if missing or defective inserts
or guides are noted; contact an authorized SKI-DOO dealer.
WARNING
The brake mechanism on your snowmobile is an essential
safety device. Keep this mechanism in proper working condi-
tion. Above all, do not operate the snowmobile without an
effective brake system. Periodically verify the condition/wear
of the brake pads.
Mmo2002-003a.book Page 91 Friday, February 2, 2001 1:47 PM
Содержание 2002 Mach Z STD
