SKG HDX 8000 Series, Руководство для начинающих

Страница: 8 / 20

6
www.skccom.com (800) 882-7779
Placing, Answering & Ending Calls
To Answer an Incoming Video Call
The system is set to auto-answer calls by default. If auto-answer is turned off:
• Your system will ring & alert you on-screen that you have a call
• Press the Call button on the remote to answer the call
• Make sure your microphone is not muted, unless you wish to remain on
mute during the call.
To Place a Call
• Make sure the HDX 8000 and monitor(s) are powered on
• Press the Call button on the remote to place a call
• A dialing window will open on your monitor along the top of the home screen
• Use the numbers and arrows on the remote control to navigate the call screen
• Use the keypad to dial the IP or ISDN number of the site you are calling. When dialing an IP
address, use the dot button on the remote control.
• Arrow to the “Quality” window to select call speed. Use the center button as an “Enter” button
• You can specify that you are dialing IP or ISDN, or let the system auto detect the call type
• Press the Call button to dial the call
• Make sure your microphone is not muted
To Hang Up a Call
• Press the Hang Up button on the remote control
• If you are in a multipoint call, the system will ask you to confirm that you wish to hang up. If you are
in a point-to-point call, the call will drop immediately, without confirmation.
• Use the center button in the arrow pad to confirm hang up
Placing a Call Through the Address Book or Call History
• Press the Call button
• Arrow to Directory or Recent Call History and press Enter
• Arrow to the desired number, then the green call button to select it
• You can also access the address book with the green Directory button
Volume & Mute Control
• Use the Volume lever on the remote to adjust call volume
• To mute the mic(s), press the Mute button on the remote control
• The button in the center of the mic pod will also mute the system
• Red lights appear on the mic & a muted mic icon will appear onscreen
• To unmute, press the Mute button on the remote or the mic pod