SKF TKRT 10, Инструкция по эксплуатации, Страница: 11 / 72

9 SKF TKRT 10
• Once the correct mode has been selected, press and hold the “MEAS”
button to start measuring.
Record a measurement:
• Keep the “MEAS” button pressed.
• Press the “MEM” button once to record a measurement.
MAX measurements, MIN measurements, AVG measurements and
DATA measurements can be stored into a memory set.
The data number will then increase by one.
Retrieve a measurement:
• Press the “MEM” button to visualize the next measurement stored.
MAX measurements, MIN measurements, AVG measurements and
DATA measurements are available.
• Press and hold the “MEM” button to switch to next Data Set.
10 selectable data sets are available from DATA 0 to DATA 9.
Designation Description
RPM Non-Contact revolutions per minute measurements
rpm Contact revolutions per minute measurements
HZ Non-Contact /Contact frequency measurements
M/M Contact Meter per minute measurements
I/M Contact Inch per minute measurements
F/M Contact Feet per minute measurements
Y/M Contact Yard per minute measurements
REV Revolution measurements
M Length measurements in Meters
(Using the largest diameter wheel)
In In Length measurements in Inches
(Using the largest diameter wheel)
FT LT Length measurements in Feet
(Using the largest diameter wheel)
Yd Yd Length measurements in Yards
(Using the largest diameter wheel)