23
L531
2,
1
675D
.0/
10.
10
Installation and initial start-up
Important: Metal fastening plates are not grounded through the TFG. If additional
electrical devices are attached you must ensure that the connection meets the in-
sulation requirements for protection class II.
Installation
Proceed as follows for installation:
1
Secure the elements that you want to connect the telescopic pillar to, so that you
can place the TFG between them.
Important: Ensure that metal fastening plates are not grounded through the TFG.
If additional electrical devices are attached you must ensure that the connection
meets the insulation requirements for protection class II.
2
Connect final and base plates with one element each of the application, using 4
fastening screws (M6).
Important: Screw in to a maximum of 25 mm. It is vital that the screws do not pro-
trude from the final and/or base plates.
3
Attach the push tube to the final plate, using a fastening screw (M10)
Important: Screw in to a maximum of 16 mm plus the thickness of the fastening
plate (see
, page 35). The screws must be at least property
class 10.9.
4
Check that all screws are sufficiently secured against self-loosening.
Please note: The fastening screws are not supplied. The bore dimensions can be
found in the
, page 35 section. Please ensure that the connec-
tion cannot become loose unintentionally.
5*
Only for TFG 1..: Connect the telescopic pillar TFG 1.. with the corresponding con-
trol unit by connecting the DIN 8 plug of the TFG 1.. with the control unit.
WARNING
Warning against hand injuries caused by trapping. Do not let any
object or person come into contact with the inner tube and/or the
final plate while the motor is running. Hold the TFG only by the ex-
ternal tube.
CAUTION
Beware of personal injury caused by the application falling off. The
final plate, which is made of plastic, can break when under load. It
is prohibited to operate the telescopic pillar TFG without adequate
support for the fastening plate or without an adapter plate! Rein-
forced adapter plates are available as accessories (see
!
!
