SKF PHL FM 10/400, Руководство пользователя

Страница: 12 / 28

12
4. Aim sensor at centre of selected belt span.
Tap or pluck the belt. The meter will beep
once to indicate that a measurement was taken.
5. Display window will show frequency result.
6. Press to toggle to newton.
7. Press to toggle to pounds.
Note: Pressing the same key a second time will return display to the hertz value.
8. Re-adjust belt tension and repeat measurement until target tension results are attained.
MEM 1
MEM 2
MEM 3
To recall stored span and mass data simply press , or .
Depending upon where you stored the data for this specific drive.
Gap 10
to 50 mm
N
Hz
lbs
N
Hz
lbs
N
Hz
lbs
DOWN
(Lbs)
UP
(Hz/N)