Protection
Protection Module Configuration with IMx-M Manager
SKF Multilog On-Line System IMx-M
2 - 151
User Manual
Complementary Differential Expansion
For detailed information on CDE measurement, see
Configuring a Master Channel
First, we need to initiate a new master channel, which will detect the collar
moving away from the sensor. For this example we will select analog channel
1, and choose the
Type
“Complementary Differential Expansion”. We will then
set the engineering units (
EU
) to "mm".
Figure 2 - 115.
Creating the Master Channel (Channel 1).
Although we are describing this as the master channel, this status is actually
assigned within the combined measurement, and is covered later in this
example.
