Safety of others*
This appliance is not intended for use by per-
sons (including children) with reduced physi-
cal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concern-
ing use of the appliance by a person responsi-
ble for their safety .
Children should be supervised to ensure that
they do not play with the appliance.
Specific safety
Always wear eye protection . The PowerLuber
can generate up to 7,000 psi
(482 bar) at stall
.
Use only Lincoln 1218, 1224, 1230 or 1236
outlet whip hoses . Grease injection injuries are
a very serious injury . Hold the hose only in the
area of the spring guard . Avoid accidental
starting . Be sure switch is not depressed when
inserting battery pack . Replace the hose at the
first sign of wear, kink or damage to the out-
side jacket . Do not bend the hose so that it
becomes kinked .
Do not overreach . Keep proper footing and
balance at all times . Proper footing and bal-
ance enable better control of the tool in unex-
pected situations .
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety shoes, hard hat
or hearing protection must be used for appro-
priate conditions.
The gun uses lubricants, that may be flam-
mable and poisonous if ingested. Do not use
gun near open flame or other fire hazards.
Greases are often marketed as high
temperature because it must maintain their
lubricating properties in hot areas, but the lu-
bricants may be flammable if the temperature
is too high. Please read all warnings on lubri-
cants before using this gun. Do not use flam-
mable greases with this grease gun.
Do not use any hose that has not been
approved by Lincoln . Extreme pressure
may cause nozzle extension or whip hose
to burst .
Replace hose at first sign of wear, kinks,
or damage to outside jacket .
Follow whip hose instructions and
warnings . Failure to comply may result in
serious injury or death .
W A R N I N G
Grease gun can develop high pressure up
to 7,000 psi
(482 bar)
. Use safety glasses
and gloves for protection during opera-
tion . Keep hands clear of exposed rubber
portion of hose .
W A R N I N G
Residual risks
Additional residual risks may arise when using
the tool which may not be included in the
enclosed safety warnings. These risks can
arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation of
safety devices, certain residual risks cannot be
avoided. These include:
• Injuries caused by touching any rotating/
moving parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech
and MDF.)
* Indicates change
5
