INSTALLATION AND OPERATING INSTRUCTIONS
Mounting the SKF Multilog On-line System IMx-16Plus
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
17 (66)
Figure 2
IMx-8 / IMx-16Plus DIN rail mounted in IP65 cabinet
The IMx-16Plus is mounted using the DIN rail bracket attached to the rear face of the
device,
Figure 3
IMx-8 / IMx-16Plus DIN rail mounting bracket
To mount it on the DIN rail, first angle and offer it to the rail so that it is hanging on
the upper part of the bracket and then rotate downwards and snap it in place with the
lower part of the bracket.