manualshive.com logo in svg

SKF CMAS 100-SL, Руководство пользователя

Поделиться
Скачать
SKF CMAS 100-SL Скачать руководство пользователя страница 19

 

SKF Machine Condition Advisor 

7 

User Manual 

•

 

Do not attempt to charge the battery with any 
charger other than the one described in this 
manual. 

•

 

Do not attempt to use the charger to charge any 
other type of device. 

•

 

Pull by plug, not by cord, when disconnecting 
the charger. 

•

 

Locate the cord so it will not be stepped on, 
tripped over, or subjected to damaging 
conditions. 

•

 

Do not operate the charger with damaged cord 
or plug. 

•

 

Do not disassemble the charger; return it to an 
authorized SKF service center for repair. 

•

 

Disconnect the charger from the outlet prior to 
cleaning. 

•

 

Do not operate the charger if it is damaged in 
any way. 

Battery Maintenance 

Use the following recommendations to prolong the life 
of your battery: 

•

 

If the device is temporarily not in use (and 
therefore not being regularly charged), it is 
important that it is recharged at least every 25 
to 30 days to prevent damage to the cells. 

•

 

The battery capacity (the length of unit's 
operational / run time) will be reduced at 
temperature extremes, i.e., both high and low 

Содержание CMAS 100-SL










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды