SKETCHNBUILD SNB-PX24, Руководство пользователя

Страница: 10 / 12

SNB-PX24 PLANER MANUAL
10
6/2016
Loosen the fastening bolts, and revolve the transfer bolt to align to the bottom of the
breaker and back press machine just above the cutting circle of blade shaft (about 0.5mm,
then tighten the fastening bolts after adjustment.
7. TESTING
1. Adjust all parts and fasten all fixtures, paying special attention attention bolts on the
pressing strip to ensure blades are properly secured and prevent personal injury or
damage to machine.
2. Ensure everything is running smoothly, and no abnormal sounds and or collision
before start the planer. Inspect the turning direction of trigonal belt from the side of
motor to see whether the blade shaft is turning left with the delivery roller and press
roller turning right. If not switch of the planer and change the electrical connection of
the motor.
3. Remove all tools, gauges and wrenches from the work table to avoid them from
rolling into the machine to avoid personal injury and damage to the machine.
4. Stop the planer for inspection when there is an abnormal sound and collision. Check
all parts to ensure that they are securely fastened. Do not restart the planer before
resolving the problem to prevent damage.
8. ACCESSORY & PARTS LIST
Accessory List
Name Specification Quantity
Equipment Planer 1
Triangle belt 900 1
Dust hood 1
Manual 1