SKETCHNBUILD SNB-12A, Руководство пользователя

Страница: 12 / 27

10
Scoring Saw Adjustment
Adjust Up & Down Adjust Left & Right
Use the handle of scoring saw on right side of panel saw to adjust, one is for
adjusting up and down and another is for left and right, turn the handle left and right
until aligning to a satisfactory height with the main saw blade.
5.8 Replacement of Scoring Saw Blade
＊
When stopping the machine, adjust the scoring saw blade to the highest pos ition,
move the moving table to the cutting direction to expose all scoring saw blades,
lock up the moving table, open the safety cap, and clockwise screw off the fixing
nuts with special spanner. Take out the front flange and dismount the scoring saw
blade.
＊
Remove the stickers in the two flanges before mounting the new saw blade.
Mount the saw blade and the front flange on the saw arbor, and then clockwise
tighten up the nut.
＊
When using the scoring saw set with stepless cut width, it shall strictly comp ly
with the following items, and disobeying the requirements of operation manual
will endanger the production, the lose caused by which is not in the claim range:
◆
Max. rotary speed of the saw blade is 8,000rpm, and allowable cut width is
2.8-3.2mm.
◆
Open and pack the adjusting devices with special care against injury.
◆
The adjusting devices can only be stored in the original packing!
◆
All connecting parts shall be mounted properly by all means.
◆
If the connecting component fittings being lost or damaged, the original
fittings shall be used for replacement.
5.8.1Setting of Scoring Saw Blade Width
＊
Use spacer to set the width of double saw blade to make it 0.1mm wider than the
main saw blade.
＊
At first, align the scoring saw with the main saw at one side of the machine, and
carry on a trial cutting.
＊
Align them in left and right by means of increasing or decreasing spacer.
5.8.2 Setting of the Single Grooving Saw Blade
Use the handle of scoring saw on right side of panel saw to adjust, one is for
adjusting up and down and another is for left and right, turn the handle left and right
until aligning to a satisfactory height with the main saw blade.