Cleaning and Care
See Insert for First Aid and Precautionary Statements.
Caution: All cleaning and maintenance should be done when product is cool and
with the fuel supply disconnected.
Caution: Do NOT clean any product parts in a self-cleaning oven.
Caution: This product should be thoroughly cleaned and inspected on a regular
basis.
Notices
1. Abrasive cleaners will damage this product.
2. Never use oven cleaner to clean any part of this product.
Before Each Use:
1. Keep the area clean and free from any combustible materials, gasoline, and other
flammable vapors and liquids.
2. Do not obstruct the flow of the combustion of LP and the ventilation air.
3. Keep the ventilation opening(s) of the LP gas tank area free and clear from debris.
4.
See “Cleaning Instructions” for proper cleaning instructions.
Cleaning Instructions / Routine Service
To ensure maximum performance and to lengthen the life of this device, perform these
steps each time your tank is empty. This model will consume a standard LP gas grill
tank every 15-20 days.
Note: While unit is in use, check the following every 2-3 days:
• Check WaveDrawer
and clean (if necessary).
• Check air passages for blockage.
1.
Turn LP gas tank valve to “CLOSED.”
2.
Disconnect LP gas tank per “Disconnecting LP Gas Tank” instructions.
3. Remove empty tank and replace with full LP gas tank.
4. Slide WaveDrawer cover onto WaveDrawer.
5. Remove WaveDrawer, empty and clean.
6. Slide WaveDrawer back into place.
7. Remove WaveDrawer cover.
8. Remove used TacTrap and dispose of properly.
9. Slide fresh TacTrap in place and remove protective paper.
10.
Remove FineTune cover by turning counterclockwise.
11.
Remove used FineTune lure (if necessary) and properly dispose.
Note:
FineTune Lure lasts at least 60 days.
12.
Remove fresh FineTune lure from package. Dispose of packaging properly.
13.
Place FineTune lure back into holder with holes on top.
14.
Replace FineTune cover.
15.
Select the lure output by adjusting the FineTune cover.
16.
Check engine and gas lines for any sign of damage or missing parts. Repair any
problems before attempting to start.
17.
Connect LP gas tank per “Installing LP Gas Tank” instructions.
18.
Remove tank cover from empty LP gas tank and place on full LP gas tank.