Skee Ball Super Shot Deluxe, Сборка и инструкция по эксплуатации

Страница: 6 / 53

Super Shot Deluxe
Assembly and Operating Manual
Page 5 of 52
ASSEMBLY INSTRUCTIONS
Major Game Component Definitions
Acme Screw
The screw that is attached to the Gear Motor and Apron Assembly. Part of the Motor-Screw Assembly.
Apron Assembly
The frame assembly at the back of the Rear Assembly that includes the angled piece of basketball flooring.
Backboard Assembly
This unit is the frame assembly that includes the Backboard, the Hoop, Hoop Net
and Hoop Sensors. Stored in a flat position on top of the Rear Assembly during shipping and affixed to
Assembly in a upright position during assembly.
Ball Guard
The framed assembly, which includes the clear Plexi-glass that is bent at a 45-degree angle at the top. The Ball
Guard is stored, under the Rear Assembly, during shipping and is installed at the front of the Rear Assembly.
Canopy
Steel wire panel that is curved in shape, stored on top of the Rear Assembly during shipping and attached to the
top of the Left and Right Netting Panels during assembly.
Control Panel Assembly
Wooden Panel located on the top of the Front Cabinet on which the four control buttons and Control Panel Decal
are located.
Crowd Panel
The frame assembly, which includes the screen printed picture of a basketball crowd, is stored under the canopy
during shipping and installed at the back of Rear Assembly in assembly.
Display Glass
Plastic panel, covering the front of the Scoreboard, and is screen-printed with the Skee-Ball Logo.
Electronic Chassis Plate
Located, in the Front Cabinet and is underneath the Chassis Plate Cover. It contains the Logic Board, Power
Supply, Sound Board and Power Distribution Board.
Front Assembly
The front part of the game that contains the Front Cabinet and the ball return area and is stored under the rear
Assembly during shipping.
Front Cabinet
Located at the front of the Front Assembly. Accessed by opening the front blue door.
Front Leg
Metal pipe approximately 20” long with leg leveler at the end and with holes predrilled for adjustment. Attached
to the Front Assembly during installation
Gear Motor
The D.C. motor and gearbox which drives the backboard back and forth, and is part of the Motor Plate Assembly.