SKE PL20 1.5KW, Руководство пользователя

Страница: 22 / 28

20
SPECIFICATIONS
Table 7. Line Mode Specifications
MODEL PL201~12KW
Rated power 1 ~ 12KW(230VAC) 1 ~ 6KW(120VAC)
Input Voltage Waveform Sine wave(Utility or Generator)
Nominal Input Voltage 230Vac 120Vac
Low Line Disconnect
184Vac±4%(NOR) 85Vac±4%(NOR)
135Vac±4%(WID) 80Vac±4%(WID)
Low Line Re-connect
194Vac±4%(NOR) 95Vac±4%(NOR)
145Vac±4%(WID) 85Vac±4%(WID)
Note: 1.NOR setting can be used for general electrical appliance
2. WID setting can be used only for some special load,
Such as lamp, fan.
High Line Disconnect
263Vac±4%(NOR) 136Vac±4%(NOR)
263Vac±4%(WID) 140Vac±4%(WID)
High Line Re-connect
253Vac±4%(NOR) 131Vac±4%(NOR)
253Vac±4%(WID) 135Vac±4%(WID)
Max AC Input Voltage 270VAC 150VAC
Nominal Input Frequency 50Hz / 60Hz (Auto detection)
Low Line Frequency Disconnect 40+0.3Hz for 50Hz, 50+0.3Hz for 60Hz
Low Line Frequency Re-connect 41+0.3Hz for 50Hz, 51+0.3Hz for 60Hz
High Line Frequency Disconnect 55+0.3Hz for 50Hz, 65+0.3Hz for 60Hz
High Line Frequency Re-connect 54+0.3Hz for 50Hz, 64+0.3Hz for 60Hz
Output Voltage Waveform As same as Input Waveform
Output Short Circuit Protection Air switch
Efficiency (Line Mode) >97%
Transfer Time 15ms (typical) 20ms max(WID)
Bypass charger enable in off mode
Yes
Note: NOR – Normal range; WID-Wide range