SKC DPS Скачать руководство пользователя страница 17

14

Recommended Collection Filters for System (not supplied with system)

Select a 

fi

 lter based on your application; required for sampling

Quartz Filters,

 47 mm, Tissuquartz

, 432 

μ

m thick, pk/25

225-1823

PTFE Filters,

§‡

 47 mm, 2.0-

μ

m pore size, with PMP support ring, pk/50

225-1747

Sampling Heads/Replacement Parts

IMPACT Samper

 includes 

fi

 lter cassette, calibration adapter, and rain 

cover for sampler; 

requires collection media (see above) and impaction 

substrate (see below) sold separately

 

PM2.5
PM10

225-392
225-390

IMPACT Sampler Inlet Only 

PM2.5
PM10

P54204
P54202

Impaction Discs for System

Select an impaction disc based on your application.

Recommended to Reduce Particle Bounce:
Replacement Pre-oiled Impaction Discs

porous plastic discs, 37 mm, ready to use, disposable, 

pk/25 

required for sampling, 

limited shelf-life  

pk/50

225-395
225-395A

For Chemical Analysis of Larger Particles:

Quartz Filters,

 37 mm, Tissuquartz, 432 

μ

m thick, pk/25

225-1822

PTFE Filters,

§

 

37 mm, 2.0 

μ

m, laminated PTFE support, pk/50 

225-27-07

§  Back pressure on PTFE 

fi

 lters can vary within the same lot.

‡    Maximum operating temperature is 464 F (240 C) based on PMP support ring.

Accessories

TSI 4146 Calibrator Kit,

 0.01 to 20 L/min, includes calibrator, soft-sided 

case, mounting lugs, tubing (1/4-inch ID), battery pack, 6 AA batteries, 
inlet 

fi

 lter, dampening module, NIST certi

fi

 cate, and manual

770-4146

Filter Cassette

225-396

Forceps,

 stainless steel

225-8371

Petri Dish Slide,

 for 

fi

 lter transport, pk/100

225-2-01

Glass Jars for Chemical Analysis  

pk/8

 pk/36

225-8376 
225-8377

DataTrac Software for Leland Legacy 

includes software on CD and 

DataTrac adapter cable

877-92

ORDERING INFORMATION

Description

Cat. No.

DPS System*

#

 includes a Leland Legacy Sample Pump with connection case, charger 

(100-240 V), 2 external battery assemblies with adapters (packaged separately), IMPACT

 

sampling head, 2 

fi

 lter cassettes, calibration adapter, rain cover for sampling head, 

25 disposable impaction discs,

 

fi

 lter cassette opener, tubing with quick-connect 

fi

 tting, 

and mounting bracket, in a heavy-duty lockable carry case

PM10 Kit

100-3901

PM2.5 Kit

100-3903

*  Provides data similar to data from Federal Reference Method samplers. The DPS System is not a 

U.S. EPA reference or equivalent method for compliance sampling.

#  DPS Systems contain Leland Legacy pumps with Li-Ion batteries and may be subject to special 

shipping regulations. See next page.

 Limited 

shelf-life

  Use in non-explosive environments only. Not intrinsically safe

‡  U.S. Patent No. 7,334,453

Содержание DPS




















Отзывы: