skcinc.com
Form 37169 Rev 210311
Page 9
Changing Time/Date
Change the time/date when moving between time zones in one of two ways:
1. Connect to the dosimeter(s) via the SKC SmartWave dB mobile app: the time/date will
automatically be adjusted to the time/date on your phone.
2. Use DataTrac dB Software to adjust the time/date and upload the setting from the PC to the
dosimeter(s) (
see DataTrac dB Software for NoiseCHEK User Manual
).
Recording/Playing a Voice Note
Record a voice note to identify details like
the kind of noise being sampled, location of sampling, wearer’s
job description, and other relevant items. You can upload and play a voice note on a PC using DataTrac
dB Software. Only one voice note can be held in NoiseCHEK, and it must be deleted or uploaded to a PC
before another note can be recorded.
Note: Voice Note can be disabled in DataTrac dB software. See DataTrac dB Software for NoiseCHEK
User Manual.
1. From the Home screen, press and hold the Voice button to begin recording a note.
Note: Maximum recording time is approximately 44 seconds.
2. End recording by pressing the Voice button again (otherwise it will be ended
automatically when recording time exceeds maximum limit).
See below
.
a.
To save the recording
, select Home (press green button). The white LED
will continue to flash intermittently (when dosimeter is powered on but not
running) to indicate that a recording is present. If you try to record another
note in the meantime, you will see the message that a recording is present.
See Voice Note Status
.
b.
To delete the recording
, select Delete (press red button). Select Yes (press green
button) to confirm; the message that the recording has been deleted will appear. The
white LED will stop flashing.
See Voice Note Status.
Recording ended manually
Recording stopped automatically
Recording deleted
Confirm deletion