skcinc.com
Form 37169 Rev 210311
Page 7
Determining Dosimeter Status
— LEDs
LEDs (visible through the windscreen LED collar) indicate charging and operation status and activity,
exposure level, and Bluetooth
®
connection.
See the table below
.
LED Description/Activity
Status
Amber, flashing continuously (device seated in
charging dock)
Not fully charged
Green, flashing continuously (device seated in
charging dock)
Fully charged
Green, single flashing approx. every 3 seconds
Sample run in progress; accumulating data
Green, double flashing approx. every 3 seconds
Sample run paused
Amber, flashing intermittently
Noise level threshold reached
Amber flashing intermittently, alternating with
green
Set % dose reached (level set in DataTrac dB
Software)
White (lower right) flashing intermittently
Voice note present.
Blue (top), flashing intermittently
Communicating via Bluetooth (with SKC
SmartWave dB app)
Using the Buttons
See the table below for how to use the dosimeter buttons (
Figure 1
) to operate the device, navigate
screens, and select screen prompts.
Button
Functions
Green
•
Turn on device.
See Turning Power On/Off.
•
Start run, pause run, and resume run.
•
Select prompts YES, OK, SELECT, HOME, RESUME, LIST, and digit in PIN for Lock
feature.
•
Undim screen.
Red
•
Turn off device (from Home, Setup, or Standby screens only).
See Turning Power On/Off
.
•
Stop sample run.
•
Select prompts NO, HOME, DELETE, and digit in PIN for Lock feature.
•
Undim screen.
Previous/Next
(left/right
arrows)
•
Scroll backwards/forwards through virtual dosimeter screens
•
Scroll up/down through History list.
•
Select digits in PIN for Lock feature.
H (History)
•
View selected sample run history.
•
Access History list.
•
Return to Home screen after sample run has ended or from a sample run history.
V (Voice Note)
•
Record voice note during sample runs
•
Access voice note recording held in memory to delete it.