Skan Holz Knut Скачать руководство пользователя страница 1

Страница: 1 / 27

Knut 430 x 250cm

General tips and refers to:

The packaging foil

can be used

to keep moisture out of the house. It is laid according to the ground area of the

house under the main bearing.

As the house is exposed constantly to the weather, it is necessary to lay a further welding line. You have to make

it for your own.

Foundation according

(to the structural calculations, not included in the scope of delivery):

concrete C25/30,

strip foundation:

w/h = 30/90cm, each 2 Ø 12 top and bottom, bow Ø 6, e < 20cm.

Bottom panel:

t=14cm,Q188A, top and bottom throughout. Anchoring of the floor beams on the strip foundation using bolts M12,
e < 60cm (by customer).
The wooden parts of the building kit are delivered with a residual moisture content of about 15%.
Wood "works"! This means that the wooden parts will swell during prolonged damp weather and shrink (dry out)
during prolonged dry periods. This only occurs in height or width, not lengthwise.
The block planks are firmly screwed to the vertical corner post during installation. This will not change its length,

but the horizontally attached planks change their height. If damp weather persists, the block planks can swell

slightly after completion. It is therefore important to leave 1mm clearance between the planks when fitting. Use
the enclosed spacer (to avoid unnecessary strains in the structure).

If the door

cannot be closed properly

, this can be adjusted by

turning the hinges

Important information

We are pleased that you have chosen a product of SKAN HOLZ.

Please check the construction set for completeness using the position list in good time before starting con-

struction or commissioning your construction team.

If individual parts are defective or missing, we will deliver

these as quickly as possible. However, we cannot refund the costs for any resulting construction delays to a
construction company.

Please understand that we cannot assume any guarantee for the following defects:

- incorrect storage before assembly
- incorrect anchoring with the ground or inadequate foundation (foundation according to statics)
- damage due to erection errors, e. g. the house is not level or not right-angled
- damage through a higher level of snow burden than statically envisaged. Recommendation: lad relief of

the roof by removing the snow layer

- storm damage (insurance cases) or violent destruction
- damage through any alteration to the design by the client
- natural formation of cracks, branch holes, twisting, decolouration or similar modification (natural

process; has no influence on the statics)

Storage information until construction

- store pallet on a level and dry surface.
- Protect from exposure to sunlight and the influences of weather; wood can warp drastically in a loose

condition!

Maintenance tips:

Please observe the attached information sheet “Care instructions/Colour treatment”.

204335