HPS-1004GP
User’s Manual
2
1.
Introduction of Product
PoE (Power-over-Ethernet) technology PoE (Power-over-Ethernet) provides maximum
30W of electricity per port to PD (Powered device), which observes IEEE 802.3at such as
IP telephone or wireless LAN access point, by realizing the power sourcing device (PSE,
switch/router or end span system).
HPS-1004GP has been designed to satisfy the management requirements of IEEE
802.3af signature, classification and electric power.
It is the End span & Single Pairs Application device used by being directly linked to the
wire PA. It can monitor the cost saving effect and overall network power as the data
and power are supplied to the PD (Powered Device) terminal by using the cable such as
UTP CAT5, CAT6 and etc. under the standard Ethernet infra structure. Also., PoE L2
Switch does not require any separate electric power work in installing the wire AP, and it
is possible to construct non-stop system through UPS in case of the power trouble, and
the convenience for installation is increased due to reduction of the installation space,
and it provides various merits such as auto power interruption and etc. in case of the
overload and cable disconnection.
2.
HPS-1004GP and Confirmation of Contents
Body User’s Manual
AC Cable Console Cable