5
•
Use only "Clean" and "Soft” water in the product.
•
Use of a water softener is recommended to prevent scale build-up
•
Using any kind of boiler water treatment (solution) can help decrease scale build-up.
•
DO NOT add detergent, wax or any chemical liquid in the water tank or steam vessel.
•
DO NOT use distilled water or filtered water below 15 ppm.
•
Connect to electrical power according to the product specifications. (See page 2,
“Product Specifications”)
•
Connect to the electrical power outlet installed in accordance with IEC 60364.
•
Be cautious of the risk of electric shock in the event of connecting to electrical power.
•
Ensure the connection status of Grounding Chain and Ground Wire to the product to
avoid static shocks.
•
Users about to use the product should carry out a visual check for insecure cable at
entry to a plug, evidence of poor wire connections or evidence of appliance or plug
overheating.
•
Make sure that all the switches on the product are off before plug-in power cables.
•
In the event of using extension cord, make sure of a ground-fault circuit interrupter
(GFCI) built in.
•
Make sure extension cord is constructed of proper diameter in accordance with the
electrical specifications. (Contact manufacturer or distributors for right extension cord)
•
Keep out of reach of children and pets.
•
This product is not intended for use by children, or by persons with reduced physical,
sensory or mental capabilities, or by person lacking experience with the product or
knowledge of the product's use, unless they have given supervision or instruction
concerning the use of the product.
•
Wear appropriate protective gear to protect users' ear, eyes and hands in operation.
•
According to steam pressure, noise can be reached to 95 decibel(dB).
•
DO NOT use the product within the range of persons who are not wearing any protective
gear.
•
Hot surface. DO NOT touch steam vessel, steam valves, steam hoses and guns in
operation.
•
Replace steam hoses immediately if ruptured.
•
Use manufacturer approved spare parts and accessories including steam hoses, steam
guns and power cables.
•
Unplug the product from its power source and allow it to cool before carrying out any
maintenance.
•
Never disable sensors in order to bypass an alarm signal.
•
Open the drain valve and release all remaining water from the steam vessel after users
shut down the product completely. (See page 13, “Shutdown operation”)
•
Never spray steam over cleaning hazardous materials or surfaces containing hazardous
substance including asbestos.
