This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding
tanks, sewage, agricultural, and other water applications.
The Tank Alert
®
EZ indoor/outdoor alarm can serve as a high or low level alarm depending on the
fl oat switch model used. This easy-to install alarm features an innovative, sleek 2-color molded
enclosure which integrates the LED red translucent beacon. The alarm sounds and the upper
half of the housing illuminates when a potentially threatening liquid level condition occurs. The
audible alarm can be silenced by pressing the Test/Silence button, but the alarm light will remain
on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset.
A green “power on” light indicates power to the alarm panel.
TANK ALERT
®
EZ Alarm Installation Instructions
TANK ALERT
®
EZ ALARM
OPTIONS
When ordered with the alarm, the system is available with:
alternate fl oat switch models for high or low level warning.
premounted terminal block so enclosure can also be used as a junction box for splicing
pump, pump switch, and pump power. Meets NEC standard for junction boxes. 20 Amps,
120/240 VAC.
6 foot (1.8 meter) power cord with 120 VAC plug and liquid tight connector. (120 VAC
model only)
120 VAC Model -
(circuits not supervised) Primary: 120 VAC, 50/60 Hz, 3.8 watts max.
(alarm condition) Operating Voltage: 9 VDC
240 VAC Model -
(circuits not supervised) Primary: 240 VAC, 50/60 Hz, 3.8 watts max.
(alarm condition) Operating Voltage: 9 VDC
Enclosure meets Type 3R water-tight standard.
External mounting tabs for easy installation.
Integrated LED beacon illuminates upper translucent half of enclosure.
Removable lower cover allows greater access for easier fi eld wiring while the internal
circuitry remains protected.
Interlocking enclosure has a unique sound chamber to amplify the horn while preventing
moisture from entering.
Automatic alarm reset, horn silence switch, and alarm test switch.
Alarm horn sounds at 82 decibels at 10 feet (3 meters)
Alarm system (when installed on separate circuit) operates even if pump circuit fails.
Includes auxiliary alarm contacts for easy attachment of remote devices: (circuit not
supervised) 240 VAC/30 VDC, 1.5 amps max., 50/60 Hz.
Complete package includes standard SJE SignalMaster
®
control switch with 15 feet
(4.57 meters) of cable (other lengths available) and mounting clamp.
Five-year limited warranty.
Patents
Pending
PREVENTATIVE MAINTENANCE
•
Periodically inspect the product. Check that the cable has not become worn or that the housing
has not been damaged so as to impair the protection of the product. Replace the product
immediately if any damage is found or suspected.
•
Periodically check to see that the fl oat is free to move and operate the switch.
•
Use only SJE-Rhombus
®
replacement parts.
