Remove the camera from the
waterproof case by lifting the clasp
from the front side of the case,
following the steps shown above.
Once free, swing the backdoor open,
then pull the camera out from the
waterproof case.
Plug the MiniUSB cable to the slot
on the side of the camera as
indicated above, and the other end
to a USB wall charger with an output
of 5V 1A, or plug it to a computer.
Remove your battery by sliding the
lock at the bottom of the camera to
release the compartment door.
Pull the battery out by the ap, plug it
to an External Dual Charger Accessory
(not shown, sold separately).
Removing the SJ6 from the
Waterproof Case.
Charging your camera using
the MiniUSB cable.
Removing the battery.
2
2
USB
HDMI
1
1
2
2
3
3
4
4
5
5
3
3
All graphics, words, and layout by Troy Ferrer 2016 [email protected]
MiniUSB Cable
1
1
