SIYI DK32S, Руководство пользователя

Страница: 79 / 97

DK32S Transmitter User Manual (V1.0.3)
- 79 -
2019 SIYI Tech All Right Reserved
The DK32S transmitter simplified the ESC calibration a lot. Users just connect their
ESC to the DK32S
sky station’s PWM port 1 to 8, then follow the tips in the screen
menu or the steps below to finish calibration.
Steps to Calibrate the ESC
1. In the
system settings menu, tap on “ESC Cali”, in the screen it shows the ESC
calibration menu;
2. According to the tips in the screen, connect your ESC signal wires to the sky
station’s PWM port 1-8, then tap on “Start”;
3. In this circumstances, the channel value of transmitter throttle stick reaches to
the maximum position automatically (do not push any joysticks); Supply power
to the aircraft, and wait for the confirming sound from aircraft motors; Then tap
on “Next”, the channel value of the transmitter throttle stick reaches to the
minimum position automatically, and wait for the confirming sound again;
4.
The ESC calibrating is finished, you can cut off the power supply.