manualshive.com logo in svg

Sixnet VT-MODEM, Руководство пользователя

Поделиться
Скачать
Sixnet VT-MODEM Скачать руководство пользователя страница 26

VT-MODEM User Manual 

Page 26 of 30 

Last Revised: 17-Aug-09 

Sixnet Technology Park 

 331 Ushers Road 

 Clifton Park, NY 12065 USA 

 +1 (518) 877-5173 

 [email protected]

 

Service Information 

 

We sincerely hope that you never experience a problem with any 

Sixnet

 product. If you do need service, call 

Sixnet 

at (518) 877-5173 and ask for Applications Engineering. A trained specialist will help you to quickly 

determine the source of the problem. Many problems are easily resolved with a single phone call. If it is 
necessary to return a unit to us, an RMA (Return Material Authorization) number will be given to you. 
 

Sixnet

 tracks the flow of returned material with our RMA system to ensure speedy service. You must 

include this RMA number on the outside of the box so that your return can be processed immediately. 
 
The applications engineer you are speaking with will fill out an RMA request for you. If the unit has a serial 
number, we will not need detailed financial information. Otherwise, be sure to have your original purchase 
order number and date purchased available. 
 
We suggest that you give us a repair purchase order number in case the repair is not covered under our 
warranty. You will not be billed if the repair is covered under warranty. 
 
Please supply us with as many details about the problem as you can. The information you supply will be 
written on the RMA form and supplied to the repair department before your unit arrives. This helps us to 
provide you with the best service, in the fastest manner. Normally, repairs are completed in two days. 
Sometimes difficult problems take a little longer to solve. 
 
If you need a quicker turnaround, ship the unit to us by airfreight. We give priority service to equipment that 
arrives by overnight delivery. Many repairs received by mid-morning (typical overnight delivery) can be 
finished the same day and returned immediately. 
 

Sixnet

 pays the return freight for material repaired under warranty. The method of outgoing shipment will be 

equivalent to the way you shipped the unit to us. If you send the unit by air, we will return it by air. 
 
We apologize for any inconvenience that the need for repair may cause you. We hope that our rapid service 
meets your needs. If you have any suggestions to help us improve our service, please give us a call. We 
appreciate your ideas and will respond to them. 
 

For

 

Your

 

Convenience: 

 

Please fill in the following and keep this manual with your 

Sixnet

 system for future reference: 

 
P.O. #: __________________   Date Purchased: ___________________ 
 
Purchased From:______________________________________________  

Содержание VT-MODEM































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды