3
NOTES ABOUT THE UNIT
PLEASE NOTE!
SIX Payment Services carries out software updates at night in order to enable
you to use your payment terminal without interruption during the day. For this reason,
your
payment terminal must be left switched on at night with a constant Internet connection.
Function
Description
Buttons
yomani:
an audible warning
signal sounds
during the payment
procedure
When general errors occur during the payment procedure, the terminal
will repeatedly sound an audible warning signal and the request “ter-
minal back to cashier please” will appear on the display. This message
can be stopped by pressing the left function key beneath the display.
Left function key
beneath the display
Setup > password
is requested
Call up the main menu with the <STOP> button. Select <5> for the
Setup function. The following terminal-specific functions can
be carried out. It is possible to reach this menu item only with the
terminal password.
<STOP> <5>
<Password>
Configuration
The terminal retrieves the latest configuration parameters.
<STOP> <5> <1>
Initialisation
Individual or all card issuers are reinitialised.
<STOP> <5> <2>
SW update
The terminal loads the latest version of the software.
Caution! Downloading the software can take several minutes.
Never pull out the plug.
<STOP> <5> <3>
Trm reset
This function is available only to service technicians and is protected
with a special password.
<STOP> <5> <4>
Info
The terminal ID and current version of the software are displayed.
<STOP> <5> <5>
Print configuration The current configuration is printed out.
Note: This detailed printout requires a good deal of paper.
<STOP> <5> <6>
Print HW info
This function is available only to service technicians and is protected
with a special password.
<STOP> <5> <8>
System
Use this function only if you are requested to do so by our hotline.
<STOP> <5> <9>
ENQUIRIES AND SETTINGS
Enquiries (journal)
Settings
Use the <STOP> button to get to the terminal’s main
menu. Select the function <3> Queries.
The following options are available:
• Shift counter (current status of the present shift)
• Daily counter (current status since the last
daily settlement)
• TRX Log Info (current status of transactions following
the last data transmission)
• Print DCC rate (optional)
• Print last ticket
Use the <STOP> button to get to the terminal’s main
menu. Select the function <4> Settings.
The following options are available:
• TRM language (change the language)
• Service PW
• Keypay tones (for yomani only)
• Reader Cleaning (for davinci only)
