
Cutout for hybrid slot reader
4
2
INSTALLATION
2.1
DIMENSIONS FOR THE DEVICE’S FRONT PANEL CUTOUT
PLEASE NOTE
(Applies to all assemblies)
• The device front into which the contact card reader is installed may have a maximum thickness of 6.6 mm.
• The nuts/screws used to affix all components must be tightened with a torque of 0.8 Nm (± 10%).
The same also applies to the 4 screws that hold the mouthpiece module together.
• The external 4 screws (affixing the reader to the device front) may have a maximum torque of 0.3 Nm for the final
tightening step.
Figure: Cutout for the device front for the davinci reader and RFID reader
Welding studs M5 (4x)
DEVICE FRONT CUTOUT
When installing the components in the device front, the cutout
dimensions detailed in this document must be applied.
Particular consideration should be given to the torque used
for the screws/ nuts, otherwise proper operation cannot be
guaranteed.
Содержание Worldline DAVINCI III
Страница 1: ...INTEGRATION GUIDE DAVINCI III VENDING...