SIVUATEK M1-65, Инструкция по установке и эксплуатации

Страница: 9 / 18

6
.3
"(
1
6
0
m
m
)
1.57"(40mm)
Accessories contents
4 screw
st4.2x30
4 espansion
boltes
1 installtion
template
TOOLS/MATERIALS REQUIRED
(not
include)
Measuring tape Safety gloves Phillips
screwdriver
Electric drill
Pencil Slotted
screwdriver
INSTALLATION INSTRUCTIONS
1.Figure out where to mount the water heater unit,
mark 4 mounting holes on the wall according to
the installation template(Fig.1).
2.Drill holes(Ø6x32mm) into the wall on those
4 marked position , put espansion bolt into the
mounting hole and then fix the 2 mounting brackets
with screws and Phillips screw driver
(Fig.2andFig.3).
3. The water heater gets 2 mounting brackets on the
back side, so all you need to do is hang the water
heater on those fixed brackets on wall, pull the
water heater unit downside to sit it tight(Fig.4).
Fig.1
Fig.4
Mounting Hole Mounting Hook
Espansion
boltes
Screw
Fig.2
Fig.3
Fig.2