SIUI CTS-7700, Руководство по эксплуатации, Страница: 8 / 20

Application Scope, Operation Conditions, Safety and Cautions
1-2
away from these kind of radiated emissions or electromagnetic waves.
c)
Do not operate this system while other devices are operating with motor or silex
switch in the same power phase; otherwise, noise will disturb your system through
the power cable.
1.3 Power Requirements
Never use this system when the power supply does not meet the following requirements,
otherwise, the system may possibly be damaged.
a) Power Voltage: Single phase, 100-240V~, tolerance±10%; 50Hz/60Hz±1Hz, (230V ±
23V~ for EU countries), 50Hz±1Hz;
b) Connection of grounded device: use a grounded socket. Before connecting to the
power supply, connect the additional potential equalization conductor to the
equipotential terminal on another grounded system or an external grounded device;
c) The removable multi-jack socket provided together with the system can only be used
to supply power for the system equipment. The connection of electric devices that are
not part of the system and the removable multi-jack socket may result in danger.
d) If the non-medical electrical equipment, supplied as a part of the system, is intended to
be supplied via a multiple portable socket-outlet with a separating transformer, the
direct connection of the non-medical electrical equipment to the wall outlet may result
in risks
；
e) Do not try to deviate any additional multi-jack socket or wire from the removable
multi-jack socket of system devices or from the system devices;
f) Any accessories or equipment which are not listed in this manual should not be
connected to this system, otherwise, it may result in danger
；
g) When the system configured as per this manual is in use, all power supply plugs of the
devices shall be connected to the same special removable multi-jack socket if the
removable multi-jack socket is powered by a special power supply device, this power
supply device shall be in compliance with requirements of EC60601-1 and