Sitten BT850A, Руководство программиста

Страница: 4 / 33

2
Decimal 27 32 n
[Range] 0
≤
n
≤
255
[Description]Setting the right side character spacing for [n¬0.125 mm].
[Note]
•
For the double-width mode, the right side character spacing is double than the normal
mode. When the character is magnified , the right side character spacing is n times
than the normalmode.
•
This command does not affect the setting of Hanzi characters.
•
The command to set the value of independent standard mode in each mode.
[Defaults] n=0
ESC!n
[Name] Select print
mode(s)
[Format] ASCII ESC !
n
Hex
1B 21 n
Decimal
27 33 n
[Range] 0
≤
n
≤
255
[Description]Selects print mode(s) ,using n as follows:
Bit OFF/ON Hex Decimal Functions
0
OFF
00 0
Character fontA(12¬24)
。
ON
01 1
Character fontB(9¬17)
。
1 - - -
N/A
2 - - -
N/A
3
OFF
00 0
Emphasized mode not selected.
ON
08 8
Emphasized mode selected.
4
OFF
00 0
Double-height mode not selected.
ON
10 16
Double-height mode selected.
5
OFF
00 0
Double-width mode not selected.
ON
20 32
Double-width mode selected.
6 - - -
N/A
7
OFF
00 0
Underline mode not selected.
ON
80 128
Underline mode selected.
[Note]
•
When both double-height and double-width modes are selected,
quadruple sizecharacters are printed.
•
The printer can underline all characters, but can not underline the space set by
HT or 90° clockwise rotated characters.

• The thickness of the underline is that selected by ESC , regardless of the
character size.
•
When some characters in a line are double or more height, all the characters
on the line are aligned at the baseline.
•
ESC E can also turn on or off emphasized mode. However, the setting of the
last received command is effective.
•
ESC —
can also turn on or off underline mode. However, the setting of the last
received command is effective
•
GS ! can also select character size. However, the setting of the last received
command is effective.
•
Emphasized mode is effective for alphanumeric and Hanzi. All print modes
except emphasized mode is effective only for alphanumeric.
[Defaults] n=0
[Reference] ESC-,ESCE,GS !