Sitten BT850A, Руководство программиста

Страница: 15 / 33

13
0,48
Left justification
1, 49
Centering
2, 50
Right justification
[Note]
•
The command is enabled only when processed at the beginning of the line
instandard mode
.
•
This command executes justification in the printing area.
•
This command justifies the space area according to HT, ESC $ or ESC \.
[Defaults] n=0
ESCc5n
[Name] Enable/disable panel buttons
[Format] ASCIIESC c 5 n
Hex 1B 63 35 n
Decimal27 99 53 n
[Range]
0
≤
n
≤
255
[Description] Enable/disable panel buttons
。
•
When the LSB of n is 0, the panel buttons are enabled.
•
When the LSB of n is 1, the panel buttons are disabled.
[Note]
•
Only the lowest bit of n is valid.
•
When the panel buttons are disabled, none of them are usable when the
printercover is closed.
•
In this printer, the panel buttons are the FEED button.
•
In the macro ready mode, the FEED button are enabled regardless of thesettings
of this command; however, the paper cannot be fed by using thesebuttons.
[Defaults] n=0
ESCdn
[Name] Print and feed n lines
[Format] ASCIIESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range]
0
≤
n
≤
255
[Description] Prints the data in the print buffer and feeds n lines.
[Note]
•
This command sets the print starting position to the beginning of the line.
•
This command does not affect the line spacing set by ESC 2 or ESC 3.
•
The maximum paper feed amount is 1016 mm (40 inches).
If the paper feedamount ( nx line spacing) of more than 1016 mm (40 inches)
isspecified,Theprinter feeds the paper only 1016 mm (40 inches).
[Reference] ESC2, ESC3
ESCpmt1t2
[Name] Generate pulse
[Format] ASCIIESC p m t1t2
Hex1B 70 m t1t2
Decimal 27 112 m t1t2
[Range]
m=0,1,48,49
0
≤
t1
≤
255
0
≤
t2
≤
255
[Description]Sends a pulse to the
specifiedconnection pins.
On time=t1x2millisecond
Off time=t2x2millisecond