background image

26

 Warranty

Termination Fee Schedule:

Order entered but not released for manufacturing             10%                                                                           
Order in any stage of production                                        75%                                                                                   
Order complete and ready for shipment                           100%

Warranty:

 Sitron warrants its product against manufacturing defects in material and 

workmanship, when installed in applications approved by Sitron, for a period of one 
year from the date of original shipment, unless otherwise stated in writing by Sitron. 
Sitron is not responsible for damage to Sitron's Products or other equipment or products 
because of improper installation or misapplication of the Products by Buyer. Installation 
or startup of Sitron's equipment must be performed under the guidelines set forth in 
Sitron's  instruction  manuals,  wiring  diagrams,  etc.,  or  performed  under  the  direct 
supervision of Sitron's field technicians or Sitron's authorized Sales Representatives, in 
order to be covered by Sitron's warranty.
Sitron shall be under no liability in respect to any defect from fair wear and tear, willful 
damage, negligence, abnormal working conditions, failure to follow Sitron's instructions 
(whether written or verbal), misuse, modification or alteration or attempted repair of the 
Goods without Sitron's approval.
Sitron shall not be liable under the above warranty (or any other warranty, condition or 
guarantee) if the total price for the Products or the payment of Services rendered has 
not been paid by the due date for payment.
The  Buyer  must  make  all  tools,  resources  or  personnel  available  to  help  Sitron  to 
diagnose the defect without any back charge.  In absence of Buyer's cooperation in this 
regard, there shall be no liability under the above Warranty.
Sitron's liability under this warranty shall be limited to repair or replacement at Sitron's 
option of such defective Products, FOB factory, upon proof of defect satisfactory to 
Sitron. Warranty does not include transport.

Return Goods:

 No goods may be returned without Sitron's permission and an RMA 

number.  Sitron  assumes  no  responsibility  for  return  shipments  made  without 
permission. In issuing credit for such shipments, Sitron reserves the right to charge a 
restocking  fee  dependent  on  Sitron's  ability  to  recondition  and  resell  the  returned 
equipment.
Insurance: The responsibility for insuring the Goods after the risk in them has passed to 
the Buyer shall be that of the Buyer.

Confidential  Information:

  All  drawings,  specifications,  and  technical  information 

provided  by  either  Buyer  or  Sitron  shall  be  treated  as  confidential  and  shall  not  be 
disclosed to anyone other than those who require it as part of the fulfillment of the order.  
Buyer  agrees  that  the  designs  and/or  any  other  related  material  provided  are  and 
remain Sitron's exclusive property and that the Buyer acquires no right, title or interest 
to this intellectual property, whether in whole or in part.  

Errors:

  Sitron  reserves  the  right  to  correct  all  typographical  or  clerical  errors  or 

omissions, in its prices or specifications.

Содержание SP10




























Отзывы: