5
4
IMPORTANT
This product is fitted with a sealed electrical connection plug that is compatible with the heater, the mains supply for
Australia and meets the requirements of international standards. This heater must be connected to a supply voltage
that is equal to that stated on the rating label. If the mains connection plug or power cord becomes damaged it must be
replaced with a complete assembly that is identical to the original, and this must be replaced by an authorised service
centre. Always follow the Australian requirements for connection to the mains supply. If in doubt always consult a
qualified electrician.
Note: EH633 + EH633R (3200W) requires installation of a 15AMP socket by a qualified electrician before use.
TECHNICAL SPECIFICATION
MODEL
EH613/EH613R/B
EH623/EH623R/B
EH633/EH633R/B
Remote Control
No / Yes
No / Yes
No / Yes
Voltage
220-240V AC ~ 50Hz
220-240V AC ~ 50Hz
220-240V AC ~ 50Hz
Input Wattage
1800W
2400W
3200W (15AMP)
Unit Weight
6.8Kg/7.5Kg
7.5Kg/8.2Kg
9.0Kg/9.7Kg
IP Rating
IPx4
IPx4
IPx4
Heater specifications can be found on the data label.
B = BLACK COLOUR
ASSEMBLY
HEATER HEAD
Attach the heater rear bracket (B) to the heater body (A) using bolts, washers and nuts. You can either mount side or
lengthways depending on the mounting surface.
Mounting Bolts
Mounting Nuts
and Washers
Mounting Bolts
To adjust mounting bolts,
remove nut and slide
mounting bolts between units
mounting bolt groove then
fit bracket, replace nut and
tighten.
(B) Heater Rear
Bracket
(B) Heater Rear
Bracket
(A) Heater Body
ELECTRICAL DATA
