sitrex GS 160, Использование и обслуживание

Страница: 8 / 24

6
SAFETY PRECAUTIONS
2.7
PERSONAL PROTECTION
If the symbols on the right are displayed, the operator
must wear these personal protective items as there is
a risk of injury.
2.8
EXCEPTIONAL OPERATIONS
A request must be made to the Manufacturer for any
maintenance operations marked with the symbol on
the right.
2.9
Before installing the machine, the customer must
ensure that the installation site is sufficiently flat,
does not slope and has been technologically
prepared for the machine.
2.10
The personnel in charge of handling the machine and
the equipment must always wear working gloves and
protective shoes.
2.11
In order to place the machine on the floor once
packaging has been removed, please refer to the
chapter on transport and positioning (part 4). Never,
in any case, raise it by its wheels or by its shaft. Use
the dead axle with adequate load-bearing ropes (see
technical specifications part 3) and raise the machine
no more than 30 centimetres from the ground (unless
there are any obstacles) and handle very slowly.
2.12
ZERO “0” EXERTING FORCE
ISOLATION OF THE MACHINE FROM ITS
ENERGY SOURCES
Before carrying out any cleaning or lubrication
operation, the machine exerting force must be turned
to zero i.e. detach the machine completely from the
tractor.
2.13
Although the manufacturer has done everything
possible to avoid any danger, risks still exist of being
crushed or cut in the area of the propeller shaft and
teeth. If you work in this area, pay the maximum
attention.