sitrex GS 160, Использование и обслуживание

Страница: 15 / 24

13
5 PRECISION ADJUSTMENT AND
START-UP
WARNING – GENERAL DANGER
Before carrying out these operations, the operator
must read and understand the Safety Precautions at
the beginning of this handbook (part 2). Make sure
that during these operations the tractor engine is
switched off, i.e. the exerting force of the machine is
zero.
Before starting the machine, proceed as follows;
5.1
Lubricate the following parts:
- idle pulleys,
- rear struts,
- propeller shaft
5.2
Make sure that tyre pressure is 2.2 Atm.
5.3
Check belt tension and if necessary, shorten any
stretching.
5.4
Make sure that forage is collected without causing
any excessive strain on the machine parts. Adjust the
belt springs to approximately 1 or 2 cm. above
ground level as follows:
Lower the three points and use the two rear levers to
adjust the distance above ground level.