sitrex DM/4, Список запасных частей и сборка, использование и обслуживание

Страница: 47 / 50

MAINTENANCE
:KHQ LQ XVH FKHFN WKH RLO
OHYHOVHYHU\GD\DQGWRSXSLI
QHFHVVDU\
2YHUJHDUER[ILJ
1= drain/loading cap with level rod
2= breather cap on disk carrier bar.
Use SAE EP 80 W 90 oil in the quantities
shown in the table. Check the level with
the special rod on the drain/loading cap
when the bar is lying horizontally.
Oil can be drained through the hole in
cap 1 when the bar is vertical.
'LVNFDUULHUEDUILJ
1= loading cap - level cap
2= drain cap
Use SAE EP 80 W 90 oil in the quantities
shown in the table.
Oil is loaded and the oil level is checked
when the disk carrier bar is vertical (it
must have been in the vertical position for
at least 5 minutes).
In order to fill up the oil unscrew both
caps 1 (filling and level) and pour in the
amount shown or the amount needed to
top up the level through the hole in cap 1
(tilt the bar slightly if necessary so it is
easier to pour in the oil) until the level of
cap 1 is reached.
OLWUHV *DOO
.
8.
*DOO
.
86$
Over-gear box 0,7 0.16 0.19
4 disk bar 1,6 0.36 0.43
5 disk bar 2.3 0.50 0.60
6 disk bar
2,9 0.64 0.77
7 disk bar 3,6 0.80 0.95