Sititek 70775, Руководство пользователя

Страница: 13 / 14

3
MAINTENANCE
Maintenance requires cleaning the device’s surface if necessary.
4 TYPICAL PROBLEMS AND POSSIBLE SOLUTIONS
Typical problems and possible solutions are specified in Table 4.
Table 4
Problem Possible reason Possible solution
The device doesn’t make
shots when turned on.
Low battery charge.
Charge or replace a battery.
Light sensor is covered or
dirty.
Uncover or clean the light
sensor.
Incorrect settings of control
unit:
- remote control mode;
- night mode (shots at night only);
- day mode (shots in day hours
only).
Check the settings of switch
panel according to Table 3.
The gas in the tank ran out.
Refuel or replace gas tank.
The device is defective. Take the device to service center.
5 PACKAGING, STORAGE AND TRANSPORTATION
Each device is supplied in individual package according to the package content as shown in Table 1.
The device is fixed in order to prevent its moving inside the package.
Packaged devices are placed into shipping corrugated cardboard box.
Packaged devices can be transported by vehicle or railway in covered trucks or containers, or by air.