Sititek 70775, Руководство пользователя

Страница: 10 / 14

Figure 5 – Screw terminal (for remote control connection)
2.2.2.2 External control device (e.g. wired remote control) connects with a use of screw terminal. Control
device connects to the retention screws according to the Figure 5. When external control device co
and – contacts, the device makes shots according to the settings on switch panel. ATTENTION! Set the
switch panel for remote control operation (2.2.2.4) .
2.2.2.3 Switch panel: 1) switches “1” and “2” set the number of shots in the series (from 1 to 4 shots in a
row);
2) switches “3” and “4” set the mode: external control, day, night, 24/7;
3) switches “5”, “6”, “7” and “8” set the pauses between shots and series, two random pause modes are
possible.
2.2.2.4 Mode settings. Raise the visor (2, Figure 2). Unscrew 4 screws and take off the control unit cover (7,
Figure 2).
Set the mode using switches. Switch positions and meanings are in the Table 3. NOTE: The switch is set when it
reaches “ON” position. The switch is not set when it reaches its number position (from 1 to 8).
Table 3
№
Function
(parameter)
Regulator 1 Regulator 2 Number of
shots
Scheme
1,2 Number of shots in the
series OFF OFF 1
ON OFF 2
+
-