7
OPERATION TEST
The operation on the system are the same no matter whether in master mode
or slaver mode.please take care when operation.
1
、
Open the system and pepper spray test
Press the
“
ON
”
button on the remote controller,it will beep 2
times,meantime,the working light will flash red every 4 seconds.it indicate the
system is open.the system need 30 seconds to warm-up after the system is
open,within this period,if the people stand in front of the system,the system
will not alarm and spray the pepper,After 30 seconds,the working light went
out,the system will turn into the surveillance mode. The first sensor will
continuously detect it
’
s surveillance place whether have people within 10m,if
have,it will automatically alarm.meanwhile,open the second sensor to
detector whether have people within 1 meters,if have,it will automatically
spray the pepper
（
see figure6
）
. please take care when test.
(Figure6)
2
、
Deactivated alarm and close the system
Once the system is in warm-up, surveillance mode,alarm mode,Press
the
”
OFF
”
button.it will beep 4 times,the working light will turn into red,in
indicate the system is closed and deactivated,if want open the system,press
the
”
ON
”
button.
3
、
Remote control to alarm
In any mode of the system,Press the
”
Alarm
”
button on the remote
controller,the system will alarm but will not spray the pepper.this will remind
somebody to help you.the system can be use within 50 meters because the
Maximum distance of the remote controllers are 50M.
