Sitecom WLR-4000 Скачать руководство пользователя страница 3

Страница: 3 / 71

Introduction

Congratulations on your purchase of the WLR-4000 Wireless Gigabit Router

300N. The WLR-4000 is compliant with 802.11n and up to 6 times faster than

standard 802.11g based routers while still being compatible with 802.11g &

802.11b devices. The WLR-4000 is not only a Wireless Access Point, but also

doubles as a 4-port full-duplex Gigabit switch that connects your wired-

Ethernet devices together at 10/100/1000 Mbps speeds.

At 300 Mbps wireless transmission rate, the Access Point built into the Router

uses advanced MIMO (Multi-Input, Multi-Output) technology to transmit

multiple streams of data in a single wireless channel, giving you seamless

access to multimedia content. The robust RF signal travels farther, eliminates

dead spots and extends the network range. For data protection and privacy,

the WLR-4000 encodes all wireless transmissions with WEP, WPA, or WPA2

encryption.

With the inbuilt DHCP Server & powerful SPI firewall, the WLR-4000 protects

your computers against intruders and most known Internet attacks and also

provides safe VPN pass-through. With the incredible speed and QoS function

of 802.11n the WLR-4000 is ideal for media-centric applications like

streaming video, gaming, and VoIP telephony to run multiple media-intense

data streams through the network at the same time, with no degradation in

performance.

The router includes Sitecom Cloud Security to protect your home network

against cybercrime.

Содержание WLR-4000








































































Результаты поиска

Содержание WLR-4000

Отзывы:

Похожие инструкции для WLR-4000

Бренды по названию

Популярные бренды

Sitecom WLR-4000, Руководство пользователя

Результаты поиска

Содержание WLR-4000

Отзывы:

Похожие инструкции для WLR-4000

Бренды по названию

Популярные бренды